Turk_WLF Posted June 10, 2009 Report Share Posted June 10, 2009 I can't seems to get my Engine Crew (6 Firefighters) set up in time before the fire over runs the trains. I’m trying to follow the walkthrough at (www.Emergency-X.com) but it's been kicking my tail. What can I do without cheating?Thanks, Quote Link to comment Share on other sites More sharing options...
Xplorer4x4 Posted June 10, 2009 Report Share Posted June 10, 2009 Dont worry about sending in all the units right away. I didnt try the engineer part, but it sounds good. Send him in first, then here is what I did as best as I recall. Send in 3 fire trucks. I personally used 3 ALS engines so i have extra medics on scene. Focus on the engines and engineer for now. Send 2 engines to the area between the trains and the building closest to the demolished one. In other words a little bit behind the engineer in this pic:http://emergency-planet.com/images/stories/w...ZNOT8FTFSiBBrtdRapid deploy both.Send one more to the area to the left of that screen shot and rapid deploy it. Then use the engineer while the ffs work on the fires, and have him disconnect the other trains.Then focus on treating the wounded, and make sure you have a firefighter or two with a extinguisher near the dump truck by the lake so it doesnt catch fire. Or you can pack up one of the ALS engines and all its personnel up there. Quote Link to comment Share on other sites More sharing options...
Newfoundking Posted June 10, 2009 Report Share Posted June 10, 2009 The picture link is dead Quote Link to comment Share on other sites More sharing options...
Xplorer4x4 Posted June 11, 2009 Report Share Posted June 11, 2009 I guess the site has been censored because the link changes to an EMP link when I post it. Quote Link to comment Share on other sites More sharing options...
