Jump to content
RedHawk504

Help for mod

Recommended Posts

To flip that, go to Create - Copy and click on the model. Then go to Modify - Mirror and left click on the Front view. MAKE SURE ONLY THE X AXIS IS SELECTED (in the top bar)!!! It should be on the left of the current model. Go to Modify - Move and move it to the right. Once it's lined up in the middle, first Modify - Flip the copy so it's right, then go to Modify - Attach and select one, then press on the other. Now go to Select - Singe and enter Vertex mode. Since the halves should be perfectly lined up with each other, find a vertex and find the vertex on the other half right next to it (the same one, basically). Once both are selected, press W. This will weld the two vertices together, making a clean line down the center. Do this with all of the vertices in the middle.

It also looks like your model is far too short and not wide enough. Still with the X axis selected, go to Modify - Scale and on the Side view drag the model to the left (just click and hold the model then move the cursor to the left) so it is stretched. Then do the same for front view.

Hope this helps.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...