RedHawk504 Posted May 28, 2010 Report Share Posted May 28, 2010 Hello foks,i want to know how i can mirror my models on the right axes, this is my problem (see the picture) Quote Link to comment Share on other sites More sharing options...
CultziBolzi Posted May 28, 2010 Report Share Posted May 28, 2010 Copy -> Mirror -> Flip -> Normals -> Calculate and then attach them toghever.If you mean how to make them good sized, then just scale them Quote Link to comment Share on other sites More sharing options...
Ami89E1234 Posted May 28, 2010 Report Share Posted May 28, 2010 To flip that, go to Create - Copy and click on the model. Then go to Modify - Mirror and left click on the Front view. MAKE SURE ONLY THE X AXIS IS SELECTED (in the top bar)!!! It should be on the left of the current model. Go to Modify - Move and move it to the right. Once it's lined up in the middle, first Modify - Flip the copy so it's right, then go to Modify - Attach and select one, then press on the other. Now go to Select - Singe and enter Vertex mode. Since the halves should be perfectly lined up with each other, find a vertex and find the vertex on the other half right next to it (the same one, basically). Once both are selected, press W. This will weld the two vertices together, making a clean line down the center. Do this with all of the vertices in the middle.It also looks like your model is far too short and not wide enough. Still with the X axis selected, go to Modify - Scale and on the Side view drag the model to the left (just click and hold the model then move the cursor to the left) so it is stretched. Then do the same for front view. Hope this helps. Quote Link to comment Share on other sites More sharing options...